松下继电器的型号及区别

松下继电器的型号及区别

DS2Y的已经停产

Nominal coil voltage Pick-up voltage Drop-out voltage Nominal operating current [±10%] Coil resistance[±10%] Nominal operating power Max. allowable voltage (at 50°C 122°F)

1.5V DC 70%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) 132.7mA 11.3 ohm 200mW 200%V of nominal voltage

3V DC 66.7mA 45 ohm

5V DC 40.0mA 125 ohm

6V DC 33.3mA 180 ohm

9V DC 22.2mA 405 ohm

12V DC 16.7mA 720 ohm

24V DC 8.3mA 2,880 ohm

48V DC 6.3mA 7,680 ohm 300mW

返回首页

Specifications

Characteristics Item Specifications

Contact Arrangement 2 Form C

Initial contact resistance, max. Max. 50 m ohm (By voltage drop of 6V DC 1A)

Contact material Ag+Au clad

Rating Max. switching power (resistive load) 60 W, 62.5 VA

Max. switching voltage 220 V DC, 250 V AC

Max. switching current 2 A

Max. carrying current 3 A

Min. operating power Approx. 98mW (147mW: 48V)

Nominal operating power Approx. 200 mW (300mW: 48V)

Electrical characteristics Insulation resistance (Initial) Min. 100M ohm (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.

Breakdown voltage (Initial) Between open contacts 750 Vrms for 1min. (Detection current: 10mA.)

Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA.)

Between contact and coil 1,000 Vrms for 1min. (Detection current: 10mA.)

FCC surge breakdown voltage between contacts and coil 1,500V

Temperature rise (at 20 °C 68 °F) Max. 65 °C with nominal voltage across coil and at nominal switching capacity

Operate time [Set time] (at 20°C 68°F) Approx. 4 ms [approx.3 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)

Release time [Reset time] (at 20°C 68°F) Approx. 3 ms [approx.3 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)(without diode)

Mechanical characteristics Shock resistance Functional Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)

Destructive Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)

Vibration resistance Functional 10 to 55 Hz at double amplitude 3.3 mm (Detection time: 10μs.)

Destructive 10 to 55 Hz at double amplitude of 5 mm

Expected life Mechanical Min. 108

Electrical Min. 5 × 105 (1A 30V DC) , Min. 105 (2A 30V DC),

Conditions Conditions for operation, transport and storage * Ambient temperature: –40°C to +70°C –40°F to +158°F;

Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)

Max. operating speed (at rated load) 60 cpm

Unit weight Approx. 4 g .14 oz

DS2E的资料

产品名称

型号 DS

AG202344

产品概要

特点 最大具有2A通断区域的小型有极继电器。

触点构成 2c

材料 Ag(Au clad)

触点动作 BBM

最大控制容量（电流） 2A

最大控制容量（电压） 30V DC

最小适用负载（参考值） 10microA 10mV DC

自保持型 Single side stable

线圈额定电压 12V DC

额定消耗功率 400mW

吸合电压 8.4VDC

释放电压 1.2VDC

置位电压 -

复位电压 -

机械寿命 1x10^8

电气寿命 5x10^5

耐电压（触点间） 1000Vrms

耐电压（触点-线圈间） 1500Vrms

使用环境温度 -40℃～+70℃

绝缘类型 -

保护构造 Sealed

端子形状 PCB, Thru-hole

选件 -

国外标准 UL/CSA

我有PDF文档,但无法给你,级别不够啊``````

特点最大具有2A通断区域的小型有极继电器。

触点构成2c

材料Ag(Auclad)

触点动作BBM

最大控制容量（电流）2A

最大控制容量（电压）30VDC

最小适用负载（参考值）10microA10mVDC

自保持型Singlesidestable

线圈额定电压12VDC

额定消耗功率400mW

吸合电压8.4VDC

释放电压1.2VDC

置位电压-

复位电压-

机械寿命1x10^8

电气寿命5x10^5

耐电压（触点间）1000Vrms

耐电压（触点-线圈间）1500Vrms

使用环境温度-40℃～+70℃

绝缘类型-

保护构造Sealed

端子形状PCB,Thru-hole

选件-

国外标准UL/CSA。

这是关于松下的广告

各公司的继电器型号命名都有规则的，你可以申请一本松下的样本书，安装型号找就可以了